SEARCH NOW FOR ALL YOUR APEX TOOLS SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APEX TOOLS
CLECO
TME-111-15-U
DISCONTINUED BY MANUFACTURER,CONTROLLER AIR FOR ELECTRIC TOOL, 115 VAC, 50/60 HZ, 1 PHASE, 15 AMP, CLECO
✓ IN STOCK!
£2,883.13
Price with VAT:
£3,459.76
APEX TOOLS
CLECO
24RAS13AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
✓ IN STOCK!
£2,343.60
Price with VAT:
£2,812.32
APEX TOOLS
CLECO
24RAA19AM3
NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
✓ IN STOCK!
£1,921.90
Price with VAT:
£2,306.28
APEX TOOLS
COOPER TOOLS
933872
APEX TOOLS,933872, MOTOR,NUTRUNNER MOTOR,BRUSHLESS,320V,2.8A, 5000RPM, REVERSIBLE,29/12PIN PLUGS,5000 RPM,300 V,2.8AMP 2BB SERIES,
✓ IN STOCK!
£2,836.95
Price with VAT:
£3,404.34
APEX TOOLS
CLECO
34RAA47AX3
PNEUMATIC NUTRUNNER, SERIES 34
✓ IN STOCK!
£1,976.52
Price with VAT:
£2,371.83
APEX TOOLS
CLECO
17EP06Q
NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
✓ IN STOCK!
£3,022.77
Price with VAT:
£3,627.32
APEX TOOLS
CLECO
TME-211-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2 CHANNEL, 115 VAC, 1 PHASE, 15 AMP, 50/60 HZ, ETHERNET, 16.5 INCH WIDTH, 17.5 INCH HEIGHT, 12.3 INCH DEPTH
✓ IN STOCK!
£2,805.78
Price with VAT:
£3,366.94
APEX TOOLS
CLECO
18EAE15AM3
NUTRUNNER, SERIES 18, RIGHT ANGLE, CORDED ELECTRIC TRANSDUCER CONTROL, TORQUE RANGE 2.95-11.1 FT LBS / 4-15 NM
✓ IN STOCK!
£2,807.51
Price with VAT:
£3,369.01
APEX TOOLS
CLECO
48EAE41AM3
ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
✓ IN STOCK!
£6,579.27
Price with VAT:
£7,895.13
APEX TOOLS
JACOBS CHUCK
09749
DISCONTINUED BY MANUFACTURER, RUBBER FLEX COLLET MODEL J-440, REPLACED BY 9749
✓ IN STOCK!
£13.49
Price with VAT:
£16.19
APEX TOOLS
JACOBS CHUCK
20N
DRILL CHUCK, 3/8-1INCH, 5JT MOUNT
✓ IN STOCK!
£294.87
Price with VAT:
£353.84
APEX TOOLS
ARMSTRONG TOOL
86-681
DISPO CAST ALLOY CUT-OFF BLADE, 1/8 X 3/4
✓ IN STOCK!
£50.35
Price with VAT:
£60.42
APEX TOOLS
ARMSTRONG TOOL
33-036
STRIKING WRENCH, 1-1/8IN, 12-PT OFFSET
✓ IN STOCK!
£41.47
Price with VAT:
£49.76
APEX TOOLS
GEARWRENCH
80437
3/8" DRIVE LONG BALL END HEX BIT SAE SOCKET 7/32"
✓ IN STOCK!
£7.86
Price with VAT:
£9.43
APEX TOOLS
GEARWRENCH
82248
48" OAL PRY BAR 1" TIP, STEEL, (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£85.51
Price with VAT:
£102.61
APEX TOOLS
ARMSTRONG TOOL
12-721
DRIVE HEX BIT SOCKET, 1/2 INCH DRIVE SIZE, 3/4 INCH FASTENER SIZE
✓ IN STOCK!
£28.21
Price with VAT:
£33.86
APEX TOOLS
GEARWRENCH
84879
3/4 DRIVE 6 POINT DEEP IMPACT SOCKET, 1-3/4"
✓ IN STOCK!
£34.89
Price with VAT:
£41.87
APEX TOOLS
GEARWRENCH
85299
(PRICE/ST) 5 PC. METRIC S-SHAPE REVERSIBLE RATCHETING WRENCH SET
✓ IN STOCK!
£125.26
Price with VAT:
£150.32
APEX TOOLS
JACOBS CHUCK
6223
DRILL CHUCK: 1/8 TO 5/8" CAPACITY, TAPERED MOUNT, JT3 KEYED, K3 KEY, 2.3" SLEEVE DIA (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£168.53
Price with VAT:
£202.24
APEX TOOLS
GEARWRENCH
80662
HAND HEX BIT SOCKET: 1/2" DRIVE, 14 MM HEX 2-1/2" OAL, 1.49" BIT LENGTH, (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£8.64
Price with VAT:
£10.37
APEX TOOLS
JACOBS CHUCK
30348
SERVICE KIT, 20N, (PRICE/KT)
✓ IN STOCK!
£210.30
Price with VAT:
£252.36
APEX TOOLS
GEARWRENCH
31037
DISCONTINUED BY MANUFACTURER, 1/2" KEYLESS CHUCK
✓ IN STOCK!
£27.00
Price with VAT:
£32.39
APEX TOOLS
JACOBS CHUCK
31138
DRILL CHUCK: 3/8" CAPACITY, THREADED MOUNT, 3/8-24 KEYED, K30 KEY, 1.43" SLEEVE DIA (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£112.85
Price with VAT:
£135.42
APEX TOOLS
JACOBS CHUCK
31409
DRILL CHUCK: 3/64 TO 1/2" CAPACITY, INTEGRAL SHANK MOUNT, 3MT KEYLESS, TAPER SHANK, 1.89" SLEEVE DIA (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£315.84
Price with VAT:
£379.01
APEX TOOLS
LUFKIN
W606PD
TAPE MEASURE: 6' LONG, 1/4" WIDTH, YELLOW BLADE 1/100, 1/16 & 1/32" GRADUATION, A19 GRADUATION, SILVER CASE (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£20.33
Price with VAT:
£24.39
APEX TOOLS
WELLER SOLDERING
PU120T
DISCONTINUED BY MANUFACTURER, POWER SUPPLY, SOLDERING STATION, ESD SAFE, FOR USE WITH WTCPT SOLDERING STATION SERIES, 120 VAC, 60 HZ, 60 W
✓ IN STOCK!
£77.56
Price with VAT:
£93.08
APEX TOOLS
WELLER SOLDERING
DS112
47441 .076"-.025" TIPLETF/DS100
✓ IN STOCK!
£7.00
Price with VAT:
£8.40
APEX TOOLS
CAMPBELL CHAIN
0893524
DISCONTINUED BY MANUFACTURER, (PRICE/FT) 35 BK STEEL SASH CHAIN
✓ IN STOCK!
£1.03
Price with VAT:
£1.24
APEX TOOLS
WELLER SOLDERING
D550
(PRICE/EA) SOLDERING GUN, 2 PIECES.; KIT CONTENTS:7250 STANDARD TIP; PRODUCT RANGE:- ROHS COMPLIANT: NO, (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£91.51
Price with VAT:
£109.82
APEX TOOLS
WELLER SOLDERING
ETA
(PRICE/EA) TIP, SOLDERING, SCREWDRIVER, 0.062IN; TIP / NOZZLE WIDTH:1.6MM; TIP / NOZZLE STYLE:CHISEL; FOR USE WITH:WELLER PES51 SOLDERING PENCIL; PRODUCT RANGE:ET SERIES; TIP / NOZZLE LENGTH ...
✓ IN STOCK!
£6.16
Price with VAT:
£7.39
APEX TOOLS
WELLER SOLDERING
CT6C6
(PRICE/EA) TIP, SOLDERING IRON, SCREWDRIVER, 3.18MM; TIP / NOZZLE WIDTH:3.18MM; TIP / NOZZLE STYLE:SCREWDRIVER; FOR USE WITH:WELLER W100PG AND W100P3 SOLDERING IRONS ; PRODUCT RANGE:-; TIP / ...
✓ IN STOCK!
£51.50
Price with VAT:
£61.80
APEX TOOLS
WELLER SOLDERING
KDS806V
(PRICE/EA) FOOT VALVE DISPENSER WITH VACUUM, DISPENSER TYPE:SYRINGE, VOLUME:-; PRODUCT RANGE:KDS806 SERIES, ACCESSORY TYPE:FOOT VALVE, FEATURES:INCLUDES DRIP-FREE VACUUM ROHS COMPLIANT: NO
✓ IN STOCK!
£415.77
Price with VAT:
£498.92
APEX TOOLS
WELLER SOLDERING
ST-5
(PRICE/EA) TIP, SOLDERING IRON, FLAT, 0.79MM; TIP / NOZZLE WIDTH:0.79MM; TIP / NOZZLE STYLE:FLAT; FOR USE WITH:WELLER WP25, WP30, WP35, WLC100 STATION; PRODUCT RANGE:-; TIP / NOZZLE LENGTH:1 ...
✓ IN STOCK!
£3.73
Price with VAT:
£4.48
APEX TOOLS
WELLER SOLDERING
PT-CC8
(PRICE/EA) TIP, SOLDERING IRON, FLAT, 3.18MM; TIP / NOZZLE WIDTH:3.18MM; TIP / NOZZLE STYLE:FLAT; FOR USE WITH:WELLER TC201 SERIES SOLDERING IRON; PRODUCT RANGE:-; TIP / NOZZLE LENGTH:15.75M ...
✓ IN STOCK!
£3.59
Price with VAT:
£4.30
APEX TOOLS
WELLER SOLDERING
PL100
(PRICE/EA) TIP, MODULAR HEATER, CONICAL, 1.27MM; TIP / NOZZLE WIDTH:1.27MM; TIP / NOZZLE STYLE:CONICAL; FOR USE WITH:WELLER 537S, 1237S, 4037S, 37, 37UG DI & SL HEATERS; PRODUCT RANGE:-; TIP ...
✓ IN STOCK!
£4.90
Price with VAT:
£5.88
APEX TOOLS
WELLER SOLDERING
7874B
(PRICE/EA) ESD SAFE DESOLDERING PUMP; DESOLDER TOOL TYPE:PUMP; TIP / NOZZLE LENGTH:-; TIP / NOZZLE O.D.:-; PRODUCT RANGE:-; PLUG TYPE:- ROHS COMPLIANT: NO, (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£30.01
Price with VAT:
£36.01
APEX TOOLS
WELLER SOLDERING
ETO
(PRICE/EA) TIP, SOLDERING PENCIL, CONICAL, 0.031IN; TIP / NOZZLE WIDTH:0.79MM; TIP / NOZZLE STYLE:CONICAL; FOR USE WITH:WELLER PES51 SOLDERING PENCIL; PRODUCT RANGE:ET SERIES; TIP / NOZZLE L ...
✓ IN STOCK!
£6.68
Price with VAT:
£8.02
APEX TOOLS
WELLER SOLDERING
PT-H8
(PRICE/EA) NOZZLE, CHISEL, 0.8MM; TIP / NOZZLE WIDTH:0.8MM; TIP / NOZZLE STYLE:425° CHISEL; FOR USE WITH:WELLER TCPS, TCP12, TCP24, TCP42 AND FE 50M SOLDERING IRONS; PRODUCT RANGE:-; TIP / N ...
✓ IN STOCK!
£4.94
Price with VAT:
£5.93
APEX TOOLS
WELLER SOLDERING
7135W
(PRICE/QTY 2) SOLDERING IRON STANDARD COPPER SOLDERING TIP:
✓ IN STOCK!
£11.93
Price with VAT:
£14.32
APEX TOOLS
WELLER SOLDERING
PTM7
1/8 INCH POINT SOLDERING LONG SCREWDRIVER TIP SERIES PT, FOR USE WITH SOLDERING STATION
✓ IN STOCK!
£3.77
Price with VAT:
£4.53
APEX TOOLS
WELLER SOLDERING
PT-L8
(PRICE/EA) TIP, SOLDERING IRON, SCREWDRIVER, 1.98MM; TIP / NOZZLE WIDTH:1.98MM; TIP / NOZZLE STYLE:SCREWDRIVER; FOR USE WITH:WELLER TC201 SERIES SOLDERING IRON; PRODUCT RANGE:-; TIP / NOZZLE ...
✓ IN STOCK!
£6.41
Price with VAT:
£7.69
APEX TOOLS
WELLER SOLDERING
PT-P8
(PRICE/EA) TIP, SOLDERING IRON, CONICAL, 0.79MM; TIP / NOZZLE WIDTH:0.79MM; TIP / NOZZLE STYLE:CONICAL; FOR USE WITH:WELLER TC201 SERIES SOLDERING IRON; PRODUCT RANGE:-; TIP / NOZZLE LENGTH: ...
✓ IN STOCK!
£6.73
Price with VAT:
£8.07
APEX TOOLS
WELLER SOLDERING
PT-R8
(PRICE/EA) NOZZLE, SCREWDRIVER, 15.75MM X 1.57MM; TIP / NOZZLE WIDTH:1.57MM; TIP / NOZZLE STYLE:SCREWDRIVER; FOR USE WITH:WELLER TC201 SERIES SOLDERING IRONS; PRODUCT RANGE:-; TIP / NOZZLE L ...
✓ IN STOCK!
£3.97
Price with VAT:
£4.77
